TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 188 of 1320

TM 9-2320-304-14&P

2-82.42

Operating Instructions (Cont)

2-10.3 LOADING AND UNLOADING CONTAINER (72 INCHES [183 CM] OR TALLER)

TO TRUCK USING FRONT LIFT ADAPTER (FLA) (CONT).

(3)

Start engine (TM 9-2320-279-10).

(4)

Push in parking brake knob (3), apply service brake pedal (4), and set transmission range

selector (5) to R (Reverse).

(5)

Release service brake pedal (4) and position rear of truck within 9 ft. (2.74 m) of front of

container (6), alining centerline of truck within 2 in. (5 cm) of container centerline.

(6)

Apply service brake pedal (4) and set transmission range selector (5) to N (Neutral).

(7)

Put PTO ENGAGE switch (7) in ON position. Make sure indicator light (8) comes on.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or damage to

equipment may result.

(8)

Turn hydraulic selector switch (9) to AUTO.

Change 2