TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 649 of 1320

TM 9-2320-304-14&P

4-213

Organizational Maintenance Instructions (Cont)

4-46. HORIZONTAL ROLLER REPLACEMENT.

Supplies

Lockwasher, Item 23, Appendix K

Lockwasher (2), Item 18, Appendix K

This task covers:

a. Removal

b. Installation

c. Follow-on Maintenance

INITIAL SETUP

Personnel Required

MOS 63S, Heavy wheel vehicle mechanic

Equipment Condition

TM or Para

Condition Description

TM 9-2320-279-10 Engine OFF

TM 9-2320-279-10 Wheels chocked

Para 4-47

Angled rollers removed

Para 4-48

Rear roller assembly

removed

References

None

Special Tools

Tool Kit, General Mechanic’s: Automotive,

Item 33, Appendix B

Lifting Device, Minimum Capacity 375 lbs

(170 kg)

Models

M1120

Test Equipment

None

Special Environmental Conditions

None

General Safety Instructions

None

a. Removal.

WARNING

Rear roller assembly weighs 375 lbs. (170

kg). Attach suitable lifting device prior to

removal to prevent possible injury to

personnel.

NOTE

Both right and left hand horizontal rollers

are removed the same way. Right

horizontal roller is shown.

(1)

Using lifting device, place rear roller

assembly (1) on clean work surface.