TM 9-2320-304-14&P
5-189
Direct Support and General Support Maintenance (Cont)
(14)
Install LHS control box cover (22) on
bracket (23) with four lockwashers (24)
and screws (25).
f. Follow-on Maintenance.
(1)
Install LHS manifold cover (
Para 4-35
).
(2)
Start engine (TM 9-2320-279-10).
(3)
Operate LHS (
Para 2-9
).
(4)
Check for oil leaks (TM 9-2320-279-10).
(5)
Shut OFF engine (TM 9-2320-279-10).
(6)
Check hydraulic oil reservoir level (TM 9-2320-279-20).
(7)
Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
5-37. LOAD HANDLING SYSTEM (LHS) HOOK ARM CYLINDER REPLACEMENT.
Special Tools
Tool Kit, General Mechanic’s,
Item 32
,
Appendix B
Pliers, Channel Lock,
Item 17
, Appendix B
Wooden Blocks (2),
Appendix H
Lifting Device, Minimum capacity 2,100 lbs.
(953 kg)
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Supplies
Oil, Hydraulic,
Item 12
, Appendix F
Sealing Compound,
Item 16
, Appendix F
Locknut,
Item 5
, Appendix K
Locknut (2),
Item 10
, Appendix K
Lockwasher (2),
Item 15
, Appendix K
Lockwasher (2),
Item 24
, Appendix K
Personnel Required
MOS 63W, Wheel vehicle repairer
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Engine OFF
TM 9-2320-279-10 Wheels chocked
Para 5-36
Hook arm manifold
removed
References
None
Models
M1120
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None