TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 963 of 1320

TM 9-2320-304-14&P

5-203

Direct Support and General Support Maintenance (Cont)

WARNING

Cylinder weighs in excess of 210 lbs. (95 kg). Attach suitable lifting device prior to

installation to prevent possible injury to personnel.

(12)

Attach lifting device to cylinder (9).

CAUTION

Transfer tube is mounted along axis of cylinder. Use blocks to protect transfer tube when

clamping cylinder in a chain vise, or damage to equipment may result.

(13)

Using lifting device, place cylinder (9) in chain vise using rubber stripping to protect cylinder

surface. Use wooden block to protect transfer tube.

(14)

Install piston (18) with rod (13) and rod bearing (7) in cylinder (9).

(15)

Install rod bearing (7) in cylinder (9) and aline bearing to cylinder screw hole halves. If rod

bearing was replaced, drill new screw hole 0.440 in. (11.2 mm) deep using no. 26 drill (0.147 in.

[3.73 mm]).

(16)

Install screw (19) in rod bearing (7).

(17)

Using lifting device, remove cylinder (9) from chain vise.

d. Follow-on Maintenance.

(1)

Install hook arm cylinder (

Para 5-37

).

(2)

Install main frame cylinder (

Para 5-40

).

END OF TASK