TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1115 of 1390

TM 9-2320-328-13&P-2

0292-7

DRAFT

0292

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

14. Remove locknut (33) and wire 3450 (34) from stud (35).

Discard locknut.

15. Remove screw (36), wire 3400 (37), and wire 2451 (38) from fuel tank pickup (39).

NOTE

Perform Step (16) if resistor pack needs to be removed from wire harness resistor pack

connector.

16. Remove resistor pack (40) from main wire harness resistor pack connector (41).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

17. Remove nut (42), washer (43), wire 3230 (44), wire 1640 (45), wire 1100 (46), wire 2640 (47), and

wire 2740 (48) from ground terminal block (49).

HWT3038

HWT3040