TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

  TM-9-2320-328-13-P-2 - Page 129 of 1390

TM 9-2320-328-13&P-2
0120-9
DRAFT
0120
HWT2330
NOTE
Note position of intercom jack prior to disconnecting intercom cable to ensure proper
installation.
Step 11.
Pull battery disconnect switch to off position (WP 0007).
Disconnect passenger side
intercom cable connector from intercom and reconnect driver side intercom cable
connector in original position (WP 0257).
Remove passenger side intercom jack cover
and disconnect intercom cable connector (WP 0257).
Check passenger side intercom
cable and connectors for bent terminals and damage.
If intercom cable has bent terminals or is damaged, replace intercom cable
and connector (WP 0257).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top