TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009
TM-9-2320-328-13-P-3

  TM-9-2320-328-13-P-3 - Page 39 of 844

TM 9-2320-328-13&P-3
0329-3
DRAFT
0329
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
4.
Disconnect upper driver side body wire harness connector (12) from lower driver side body wire harness
connector (13).
5.
Route upper driver side body wire harness (14) through bezel box (15) and hose bed assembly (16).
6.
Remove three nuts (17), lockwashers (18), six washers (19), and screws (20) from bezel box (15) and hose
bed assembly (16).
Discard lockwashers.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Hose bed assembly weighs approximately 265 lb. (120 kg).
Do not attempt to lift or
move hose bed assembly without the aid of an assistant and a suitable lifting
device.
Failure to comply may result in injury or death to personnel.
7.
With the aid of an assistant and a suitable lifting device, remove ten screws (21), lockwashers (22),
washers (23), and hose bed assembly (2) from water tank (24).
Discard lockwashers.
HWT2904
HWT2416A
WARNING
ICON 07,10,11


Back to Top