TM-9-2320-338-10
TRUCK, CARGO, 8X8, M977A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-338-10 - Page 1028 of 1120
2
3
1
Figure 5.
3
3
FORWARD
Figure 6.
NOTE
If possible, unscrew jack ram until it contacts jacking point on equalizing
beam prior to completing Step (7).
7.
Raise jack (2) until firm contact is established with apex of equalizing beam (3).
NOTE
•
Studs and lugnuts on driver side of vehicle have left-hand threads.
Rotate lugnuts clockwise to loosen, counterclockwise to tighten.
Studs and lugnuts on passenger side of vehicle have right-hand
TM 9-2320-338-10
0152
0152-6
Back to Top
