TM-9-2320-338-10
TRUCK, CARGO, 8X8, M977A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-338-10 - Page 258 of 1120
WARNING
If operator cannot see load during operation, operate crane from RE-
MOTE CONTROL UNIT. Failure to comply may result in injury or death
to personnel.
NOTE
•
Failure of hydraulic system will stop crane operation and lock crane
in place. If hydraulic system fails during crane operation, refer to per-
form immediate action for loss of hydraulic system. (WP 0100)
•
If electrical system fails during crane operation, refer to perform
emergency hydraulic operation when grove crane electrical power
fails. (WP 0101)
•
Grove crane can operate on up to 5-degree side slope.
2.
Start engine. (WP 0044)
3.
Position vehicle on level ground so all loading and unloading can be done from one
position.
4.
Set transmission range selector (1) to N (neutral).
NOTE
Dashboard parking brake indicator will illuminate when PARKING
BRAKE control is applied.
5.
Pull out PARKING BRAKE control (2).
TM 9-2320-338-10
0038
0038-2
Back to Top
