TM-9-2320-338-10
TRUCK, CARGO, 8X8, M977A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-338-10 - Page 411 of 1120
OPERATOR MAINTENANCE
OPERATE TURN SIGNALS
INITIAL SETUP:
Not Applicable
SET TURN SIGNAL ON/OFF
NOTE
•
Ensure that the 24V battery disconnect switch is set to ON position
(WP 0074) before operating turn signals.
•
If left turn is desired, complete Step (1). If right turn is desired, skip
to Step (2).
1.
Set turn signal lever (1) down to left turn position. Left turn indicator (2), and driver side
front (3) and rear (4) composite lights will flash (approximately once per second)
simultaneously.
TM 9-2320-338-10
0070
0070-1
Back to Top
