TM-9-2320-338-10
TRUCK, CARGO, 8X8, M977A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-338-10 - Page 439 of 1120
3
2
Figure 14.
NOTE
•
If axle and axle stop are close enough (2 in. [5 cm] or less) to
effectively install limp home setup, skip to Step (9).
•
If axle is too far from axle stop (more than 2 in. [5 cm]) to effectively
install limp home setup, continue with Step (4).
4.
Remove two wheel chocks (4), jack base plate (5), jack (6), 7 ft. (2.1 m) chain (7), and
shackle (8) from stowage.
TM 9-2320-338-10
0077
0077-11
Back to Top
