TM-9-2320-338-10

TRUCK, CARGO, 8X8, M977A4

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-338-10 - Page 937 of 1120

Table 1.

PMCS - WEEKLY - Continued

Item

No.

Interval

Item to

be

Checked

or

Serviced

Procedure

Equipment

Not Ready/

Available If:

e.

Set up outrigger pads. Check

that two retaining pins are at-

tached to each outrigger pad.

Retaining

pin missing

from either

end.

WARNING

Keep hands and feet clear of

outrigger jack cylinders. Fail-

ure to comply may result in

injury or death to personnel.

NOTE

Adjust outrigger pad position

as required so rod end will

lower into pad socket.

f.

Move LH O/R JACK control

lever to DOWN position and

lower outrigger jack until rod

end is firmly seated in outrig-

ger pad. Install retaining

pins.

Outrigger

jack cylin-

der will not

come out or

will not low-

er com-

pletely into

pad.

g.

Move RH O/R JACK control

lever to DOWN position and

lower outrigger jack until rod

end is firmly seated in outrig-

Outrigger

jack cylin-

der will not

come out or

will not low-

er com-

TM 9-2320-338-10

0145

0145-37