TM-9-2320-341-10
TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8 M983A4 LET
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-341-10 - Page 14 of 962
•
Use extreme care when measuring voltage while engine is running
around rotating fan blade and hot engine parts. Failure to comply may
result in injury or death to personnel.
WARNING
HEAVY-DUTY WINCH OPERATION
•
All personnel must stand clear during winching operations from
possible snapping cable or shifting load. Failure to comply may result
in injury or death to personnel.
•
When hooking up for winching operations, position throat (open part)
of hook upward in case overloading straightens out hook. Failure to
comply may result in injury or death to personnel.
•
The cable drum requires a minimum of three or four wraps of wire
rope (cable) for safety. Failure to comply may result in injury or death
to personnel.
•
Be careful when handling the winch cable. Ensure cut ends are taped.
Ensure cut ends of cable on winch assembly are securely fastened
down. Failure to comply may result in injury or death to personnel.
•
Always wear leather gloves when handling winch cable. Failure to
comply may result in injury or death to personnel.
WARNING
PARTS UNDER PRESSURE
•
Wear safety goggles and use caution when removing or installing
springs, snap rings, retaining rings, and other parts under spring
tension. These parts can act as projectiles. Failure to comply may
result in injury or death to personnel.
•
The radiator is very hot and pressurized during vehicle operation. Let
radiator cool before removing cap. Failure to do so can result in
serious burns.
TM 9-2320-341-10
l
Back to Top
