CAUTION
Once tire is in contact with the ground, do not press power control with
directional control lever in LOWER position. This could put undue stress
on tire carrier and may cause damage to equipment.
NOTE
The tire carrier can be stopped at any time during lowering operations by
releasing the power control and moving the directional control lever to
RAISE position.
10. Once tire carrier has passed vertical (approximately 6 in. [15.24 cm] of movement),
release power control (11) and allow tire carrier to lower on its own until tire contacts
ground.
11. Move directional control lever (8) to raise position.
RAISE TIRE CARRIER
CAUTION
Ensure the passenger side of the vehicle has 6 ft. (1.83 m) of clearance
from the battery box forward to accommodate the tire carrier lowering or
damage to equipment may occur.
NOTE
This procedure is a two soldier task.
1.
If vehicle is not idling, set ignition switch (1) to on position , and check that SPARE TIRE
LOOSE indicator (2) is illuminated.
TM 9-2320-341-10
0083
0083-6