•
Special care must be used during operations in extreme cold
environment. In extreme cold, engine coolant and fluid in windshield
washer can freeze. Batteries can freeze and crack. Oil and grease
may get thick and stiff. Rubber and metal parts may crack or become
brittle and break easily.
•
Proper component lubrication is a must for extreme cold operation.
1.
Principles and procedures for operating in cold environment (WP 0093) also apply to
extreme cold environment.
2.
Ensure arctic engine heater kit has been installed.
3.
Operate arctic engine heater as needed.
WARNING
Do not touch extremely cold metal (below -26°F, -32°C to -65°F, -54°C).
Bare skin may freeze to cold metal. Failure to comply may result in injury
or death to personnel.
NOTE
If additional air is put in tires for standby periods, lower tire pressure to
normal amounts before driving vehicle.
4.
In areas where temperatures reach -50°F (-46°C) or colder, fill tires with air
approximately 10 psi above normal for long standby periods and overnight.
END OF TASK
END OF WORK PACKAGE
TM 9-2320-341-10
0094
0094-2