1
2
3
5
4
Figure 18.
3.
Raise tire carrier slightly so weight of flat wheel and tire assembly pulls itself closer to
tire carrier mounting bracket (3) and onto carrier mounting bracket alignment ridges (4).
4.
Install and hand-tighten four spare wheel and tire assembly retention screws (5) into
holes provided in tire carrier mounting bracket (3).
5.
Securely tighten four spare wheel and tire assembly retention screws (5).
6.
Raise tire carrier.
7.
Pick up and stow emergency marker kit (as necessary).
END OF TASK
END OF WORK PACKAGE
TM 9-2320-341-10
0138
0138-17