NOTE
Trajectory area as shown applies to all wheel/tire assemblies.
6.
Inflate or deflate until proper pressure is attained. Press latch handle (7) and pull air
chuck (8) from valve stem extension (6). Install valve cap (5).
TRAJECTORY
TRAJECTORY
TRAJECTORY
8
7
5
6
TRAJECTORY
Figure 4.
7.
Shut OFF engine. (WP 0057)
WARNING
Hold end of air line when disconnecting from quick-disconnect coupling.
Air line is under pressure and can be ejected at a high rate of speed.
Failure to comply may result in injury or death to personnel.
8.
Remove combined pressure gauge/inflation hose (4) from air hose (1).
TM 9-2320-341-10
0141
0141-6