TM-9-2320-342-10-1
TRUCK, WRECKER, 8X8 M984A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-342-10-1 - Page 1175 of 1428
STOW OUTRIGGERS - Continued
1
5
1
2
2
6
7
7
6
3
3
4
Figure 24.
NOTE
Operate left and right outrigger jack (LH O/R JACK and RH O/R JACK)
control levers at the time until both outrigger jack cylinders are out of pads.
2.
Move left outrigger jack (LH O/R JACK) and right outrigger jack (RH O/R JACK) control
levers (3 and 4) to UP position to retract outrigger jack cylinder (5) completely.
3.
Install two retaining pins (1) into each outrigger pad (2).
4.
Stow each outrigger pad (2) on appropriate stud (6).
5.
Install safety pins (7) through each stud (6).
WARNING
Stand clear of outrigger beams while operating lever. Failure to comply
may result in injury or death to personnel.
TM 9-2320-342-10-1
0102
0102-27
Back to Top
