TM-9-2320-342-10-1

TRUCK, WRECKER, 8X8 M984A4

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-342-10-1 - Page 1315 of 1428

WINCH MIRED VEHICLE FORWARD - Continued

•

When pulling cable through tensioning device, push sheave towards

frame rail to allow clevis to pass through.

12.

Pay out cable (9) while assistant pulls cable (9) until it is 6 in. to 1 ft. (15 cm to 30 cm)

past the front roller guide (12).

13

9

13

M977A4 SHOWN

15

14

12

9

Figure 5.

13.

Stop paying out cable (9).

14.

Assistant routes cable (9) through cable guide (13), over sheave (14), between roller

(15), and side of cable guide (13).

15.

Pay out winch cable (10) as assistant routes cable over first axle and 1 ft. (30 cm)

past front roller guide assembly (12).

TM 9-2320-342-10-1

0115

0115-5