TM-9-2320-342-10-1
TRUCK, WRECKER, 8X8 M984A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-342-10-1 - Page 296 of 1428
PREPARE TO OPERATE HEAVY-DUTY WINCH - Continued
10.
Set H.D. WINCH CONTROL switch (8) to OFF.
11.
Set POWER switch (9) to ON.
12.
Push LATCH switch (10) to ON, and release. Engine idle should increase to
approximately 1500 rpm.
13.
Pull RIGHT TOW CYLINDER control lever (11) and LEFT TOW CYLINDER control
lever (12) to fully extend right tow cylinder (13) and left tow cylinder (14).
Back to Top
