TM-9-2320-342-10-1

TRUCK, WRECKER, 8X8 M984A4

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

  TM-9-2320-342-10-1 - Page 370 of 1428

START WARM ENGINE - Continued
Allison
TRAILER
AIR SUPPLY
M
M
2
4
1
3
Figure 4.
2.
Set ignition switch (2) to ON position.
3.
Set transmission range selector (3) to N (neutral).
NOTE
Perform Step (4) up to seven times. If engine does not start after eight
attempts, notify field level maintenance.
4.
Push engine start switch (4) for no longer than 10 seconds, or until engine starts.
NOTE
Engine start switch will spring back to off position when released.
Brake system failure (LOW AIR) indicator may illuminate and buzzer
may sound upon engine start.
5.
Release engine start switch (4) immediately after engine starts.
CAUTION
If engine oil pressure gauge does not show engine oil pressure within 10
to 15 seconds after starting engine, shut off engine (WP 0057)
immediately and notify field level maintenance. Failure to comply may
result in damage to equipment.
TM 9-2320-342-10-1
0044
0044-6


Back to Top