TM-9-2320-342-10-1
TRUCK, WRECKER, 8X8 M984A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-342-10-1 - Page 423 of 1428
OPERATOR MAINTENANCE
TOW HEMTT- FRONT LIFT
INITIAL SETUP:
Not Applicable
HOOKUP
WARNING
Armor access plate weighs 75 lbs (34 kg). Do not attempt to lift or move
access plate without the aid of an assistant and a lifting device. Failure
to comply may result in injury or death to personnel
CAUTION
Due to weight considerations, HEMTT series vehicles that have armor kit
installed must be completely emptied of payload prior to beginning front
lift and tow procedures. Failure to comply may result in damage to
equipment.
NOTE
•
If disabled vehicle does not have armor kit installed, skip to Step (2).
•
This procedure is a two soldier task.
1.
Complete the following steps if disabled vehicle has armor kit installed:
a.
Remove armor access plate which fits around front tow eyes of disabled vehicle.
b.
With aid of an assistant, stow armor access plate on disabled vehicle.
NOTE
•
Each recovery situation is unique and requires assessment to
determine if the driveline is suitable for transport. When in doubt,
consult with field level maintenance.
•
This procedure is a two soldier task.
TM 9-2320-342-10-1
0060
0060-1
Back to Top
