TM-9-2320-342-10-1

TRUCK, WRECKER, 8X8 M984A4

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

  TM-9-2320-342-10-1 - Page 439 of 1428

HOOKUP - Continued
42
47
Figure 20.
CAUTION
When lifting and towing an A4 HEMTT series vehicle (refer to data plate
on inside of drivers side door) special care must be taken to avoid causing
damage to the vehicle air suspension system. Always turn No. 1 axle
(front lift only) air suspension ball valves OFF prior to lifting the A4 HEMTT
series vehicle (refer to operate air suspension ball valves (WP 0043) for
more information on ball valve operation). Failure to comply may result
in damage to equipment.
NOTE
If disabled vehicle is A4 HEMTT series vehicle (refer to data plate on
inside of driver side door), complete Step (29).
If disabled vehicle is BASE or A2 HEMTT series vehicle (refer to data
plate on inside of driver side door), skip to Step (29).
29.
Position disabled vehicle No. 1 axle driver side (shown) and passenger side ball valve
handles (48) OFF.
TM 9-2320-342-10-1
0060
0060-17


Back to Top