DISCONNECT - Continued
NOTE
•
After lowering disabled vehicle, extend lift and tow cylinders
approximately 2 to 4 inches (50 to 100 mm) to allow for adjustment
when removing adapters.
•
Expect wrecker air suspension system to deflate air springs to
achieve normal ride height once weight of disabled vehicle is
removed.
4.
Prepare retrieval system for operation (WP 0059) and pull LIFT CYLINDER control
lever (4) and lower disabled vehicle to ground.
4
Figure 24.
WARNING
If disabled vehicle's parking brake is inoperative, chock wheels of
disabled vehicle (refer to operator's manual). Failure to comply may result
in injury or death to personnel.
5.
Engage (pull out) PARKING BRAKE control on disabled vehicle (refer to operator’s
manual).
6.
Remove tow light cable (5) from wrecker.
TM 9-2320-342-10-1
0061
0061-21