TM-9-2320-342-10-1

TRUCK, WRECKER, 8X8 M984A4

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-342-10-1 - Page 654 of 1428

HOOKUP - Continued

WARNING

Driveshafts can weigh up to 100 lbs (45 kg). Properly support driveshafts

when removing screws. After screws and brackets are removed,

driveshaft can fall. Failure to comply may result in injury or death to

personnel.

NOTE

•

To remove driveshaft screws, use wrench located in PLS BII stowage

box.

•

Driveshaft ends at No. 2 axle and transfer case are removed the

same way.

35.

Support No. 2 axle driveshaft (41) while assistant removes four screws (42) and two

brackets (43).