HOOKUP
- Continued
20.
Insert two pins (19) through MUAs (15) and front tow eyes (20). Install quick pins (21)
in pins (19).
21.
Operate retrieval system, and with aid of an assistant position cross tube (7) so hole
#3 on MUAs (15) align front tow eyes (20).
22.
Insert two pins (18) through MUAs (15) and front tow eyes (20). Install quick pins (22)
in pins (18).
23.
Push in PARKING BRAKE control and remove chocks on disabled vehicle (refer to
MTVR operator's manual).
NOTE
Do not lift vehicle off ground when performing Step (24).
24.
Alternately push in RIGHT TOW CYLINDER (23), LEFT TOW CYLINDER (24), and
LIFT CYLINDER control levers (6) until tow cylinders (2) are fully retracted.
24
6
23
2
Figure 9.
25.
Remove two 16 ft. (5 m) safety chains (25) from wrecker stowage.
TM 9-2320-342-10-1
0074
0074-8