HOOKUP - Continued
NOTE
Operator must allow wrecker air suspension system to completely adjust
for added weight of disabled vehicle before raising disabled vehicle to
final height of 1 ft. (30 cm).
41.
Push in LIFT CYLINDER control lever (6) to retract lift cylinder (42) to raise disabled
vehicle approximately 3 in. (8 cm) off ground.
a.
Once wrecker air suspension system has adjusted for added weight of disabled
vehicle, push LIFT CYLINDER control lever (6) to retract lift cylinder (42) and
raise disabled vehicle to final height of 1 ft. (30 cm).
42
2
6
Figure 16.
NOTE
Adjust slack in two 12 ft. (3.6 m) tow chains so lengths between cross
tube and wrecker are approximately 1 ft. (30 cm) off ground.
42.
Set POWER switch (39) to OFF position.
TM 9-2320-342-10-1
0076
0076-15