TM-9-2320-343-10
TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-343-10 - Page 264 of 1128
SETUP OUTRIGGERS
WARNING
Stand clear of outrigger beams while operating levers. Failure to comply
may result in injury or death to personnel.
NOTE
•
Always operate control levers with light, even pressure.
•
Outrigger beams will come out slower with light pressure on lever.
Pushing lever to full travel will cause faster movement.
•
Although either right or left side outrigger may extend first, both out-
riggers will extend when O/R EXT control lever is positioned to OUT.
1.
Move outrigger extension (O/R EXT) control lever (1) to OUT position until right and left
outrigger beams (2) are fully extended.
TM 9-2320-343-10
0038
0038-6
Back to Top
