TM-9-2320-343-10
TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-343-10 - Page 373 of 1128
OPERATOR MAINTENANCE
DRIVE VEHICLE IN SLIPPERY CONDITIONS
INITIAL SETUP:
Not Applicable
OPERATE VEHICLE
CAUTION
Do not move traction control switch while vehicle is moving. Damage to
drive line may result.
NOTE
•
The traction control switch has three positions:
.
•
After traction control switch is positioned on, let vehicle creep forward
several feet to allow shift collars to fully engage.
1.
If TRANSFER CASE shift lever (1) is set to LO, 8X8 is automatically engaged and
indicator light (4) will illuminate. Set traction control switch (2) to INTER AXLE. Indicator
light (3) will come on.
TM 9-2320-343-10
0055
0055-1
Back to Top
