TM-9-2320-343-10
TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-343-10 - Page 387 of 1128
OPERATOR MAINTENANCE
OPERATE DOME LIGHT
INITIAL SETUP:
Not Applicable
TURN DOME LIGHT ON/OFF
CAUTION
Failure to place light switches in off position when vehicle is not in use
may cause battery and/or vehicle damage.
NOTE
•
Dome light is located on very rear of cabin overhead centered
between operator and crew seats.
•
Dome light switch is a 2-position switch; down is off, up is on.
•
Dome light is disabled when B.O. SELECT switch is positioned on.
•
Ensure that the 24V battery disconnect switch is set to ON position
(WP 0074) before operating lights.
1.
Set DOME switch (1) to on/off position as required.
TM 9-2320-343-10
0060
0060-1
Back to Top
