TM-9-2320-343-10

TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-343-10 - Page 935 of 1128

Table 1.

PMCS - WEEKLY - Continued

Item

No.

Interval

Item to

be

Checked

or

Serviced

Procedure

Equipment

Not Ready/

Available If:

b.

Check fan control.

c.

Check cabin air directional

control.

d.

Check heater temperature

control.

e.

Check air conditioning con-

trol.

29

Weekly

Material

Handling

Crane

1.

Inspect crane for loose nuts and

bolts, hydraulic leaks, damage to

hydraulic hoses and lines, and

obvious damage.

Class III

leak present

or damage

to hoses,

lines, or fit-

tings.

NOTE

For more information on ma-

terial handling crane operat-

ing instructions, refer to grove

crane operation (manual con-

trol) procedures. (WP 0038)

2.

Check that crane hydraulic sys-

tem is operable as follows:

a.

Start engine. (WP 0044)

b.

Set HYD ENABLE switch in

on position. MAIN HYD EN-

ABLE indicator will illumi-

nate.

TM 9-2320-343-10

0145

0145-31