TM-9-2320-344-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985A4GMT

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-344-10 - Page 375 of 1012

OPERATOR MAINTENANCE

PORTABLE WORK LAMP OPERATION

INITIAL SETUP:

Not Applicable

INSTALL/OPERATE/REMOVE PORTABLE WORK LAMP

NOTE

Ensure that 24V battery disconnect switch is ON (WP 0071) before op-

erating work lamp.

1.

Remove work lamp (1) and work lamp harness (2) from stowage.

1

5

4

2

3

Figure 1.

2.

Mount work lamp (1) on vehicle using magnet (3).

3.

Install work lamp harness plug (4) on work lamp terminal (5).

4.

Route work lamp harness (2) through driver side door opening (6), between inside of

cab roof (7) and air horn valve hoses (8).

TM 9-2320-344-10

0055

0055-1