OPERATOR MAINTENANCE
OPERATE EMERGENCY FLASHERS
INITIAL SETUP:
Not Applicable
TURN EMERGENCY FLASHERS ON/OFF
NOTE
•
Ensure that the 24V battery disconnect switch is set to ON position
(WP 0071) before operating emergency flashers.
•
Highway Emergency Marker Kit (WP 0094) should be used to mark
location and caution oncoming traffic whenever vehicle is disabled or
must park in areas where there is other traffic.
1.
Push emergency flasher switch (1) in. Both left (2) and right (3) turn indicators, and front
(4) and rear (5) composite lights will flash simultaneously at approximately once per
second.
TM 9-2320-344-10
0068
0068-1