NOTE
•
If 7 ft. (2.1 m) chain can be disconnected, skip to Step (9).
•
If 7 ft. (2.1 m) chain is too tight to disconnect, continue with Step (3).
•
Removal of limp home setup No. 4 axle is shown. Removal of limp
home setup for No. 3 axle is done in same manner.
3.
Drive flat/shredded tire onto two wheel chocks (3).
3
Figure 24.
4.
Check to see if 7 ft. (2.1 m) chain (1) can be disconnected from grab hook (2).
TM 9-2320-344-10
0074
0074-18