9
8
10
Figure 5.
7.
Remove hand pump handle (9) from stowage, insert into hand pump receptacle (10).
Move hand pump handle (9) up and down rapidly, tire carrier should begin to move.
CAUTION
Once tire is in contact with the ground, do not pump hand pump handle
with directional control lever in LOWER position. This could put undue
stress on tire carrier and may cause damage to equipment.
NOTE
The tire carrier can be stopped at any time during lowering operations by
stopping use of hand pump and moving the directional control lever to
RAISE position.
8.
Once tire carrier has passed vertical (approximately 6 in. [15.24 cm] of movement), stop
pumping hand pump handle (9) and allow the tire carrier to lower on its own until spare
tire contacts ground.
TM 9-2320-344-10
0079
0079-5