8
9
7
10
Figure 9.
8.
Remove cap from auxiliary air fitting (8).
9.
Connect air hose (9) to auxiliary air fitting (8).
NOTE
•
It may be necessary to simultaneously hold lever on air hose with tire
carrier pump power control dependant on type air hose used.
•
The operator will notice a small amount of oil being expelled with the
air from the tire carrier pump each time it cycles, this is a normal
condition.
•
When the power control is pressed, the tire carrier pump cyclic rate
will be rapid at first, and then slow noticeably. As cyclic rate slows,
the operator should notice the tire carrier begin to move.
10. Press and hold power control (10).
TM 9-2320-344-10
0080
0080-10