(4) Allow transmission to cool.
f.
When transmission temperature gauge (3) reads normal range:
(1) Apply service brake pedal (5).
NOTE
Dashboard parking brake indicator will go out when PARKING
BRAKE control is released.
(2) Push in PARKING BRAKE control (4).
(3) Set transmission range selector (1) to normal gear range.
(4) Continue operation.
3.
If water temperature gauge (6) indicates coolant temperature is near overheating,
perform the following steps:
a.
Slow vehicle.
b.
Set transmission range selector (1) to next lower gear range.
c.
Continue operation.
d.
When water temperature gauge (6) reads normal range:
(1) Set transmission range selector (1) to normal gear range.
(2) Continue operation.
e.
If water temperature gauge (6) does not return to normal range:
(1) Stop vehicle.
(2) Set transmission range selector (1) to N (neutral).
NOTE
Dashboard parking brake indicator will illuminate when PARKING
BRAKE control is applied.
(3) Pull out PARKING BRAKE control (4).
(4) Allow engine to cool.
f.
When water temperature gauge (6) reads normal range:
(1) Apply service brake pedal (5).
NOTE
Dashboard parking brake indicator will go out when PARKING
BRAKE control is released.
(2) Push in PARKING BRAKE control (4).
TM 9-2320-344-10
0086
0086-3