TM-9-2320-346-10
TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-346-10 - Page 15 of 1184
WARNING
LHS and CBT OPERATION
•
Check for overhead power lines, ground condition for firmness, and
other obstructions before attempting LHS operation.
•
LHS hook maximum lifting height is 17 ft. 2 in. (5.23 m). Failure to
comply can result in injury or death to personnel.
WARNING
PARTS UNDER PRESSURE
•
Wear safety goggles and use caution when removing or installing
springs, snap rings, retaining rings, and other parts under spring
tension. These parts can act as projectiles. Failure to comply may
result in injury or death to personnel.
•
The radiator is very hot and pressurized during vehicle operation. Let
radiator cool before removing cap. Failure to do so can result in
serious burns.
•
During pressure tests, ensure air pressure is drained to 0 psi (0 kPa)
before taking off any components. If pressure is not released, plates
or line could blow off and harm personnel. Do not drain air from tank
with any part of body in air spray path. Skin embolisms and/or debris
in eyes can occur from released pressure.
•
High air pressure may be released from valve stem when valve core
is removed. Stay clear of valve stem after core is removed. Ensure
all personnel wear suitable eye protection. Failure to comply may
result in injury to personnel.
•
Stand clear of trajectory area during deflation or personal injury or
death may result.
•
Lock-ring is under tension. If lock-ring breaks loose it could cause
injury to personnel. Keep hands and fingers away from lock-ring
when removing.
TM 9-2320-346-10
m
Back to Top
