TM-9-2320-346-10
TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-346-10 - Page 315 of 1184
NOTE
•
Pull out PARKING BRAKE control when bridge bay is fully unloaded
to the ground.
•
Dashboard parking brake indicator will illuminate when PARKING
BRAKE control is applied.
20. Position MAIN FRAME switch (29) to UNLOAD to release tension on winch cable.
Release when cable is slack enough so winch hook (16) may be unhooked from bay
lifting eye (17).
WARNING
•
Always wear protective gloves when handling winch cable. Never let
cable run through hands. Frayed cables can cut severely. Failure to
comply may result in injury or death to personnel.
•
Never operate winch with less than five wraps of cable on winch
drum. Failure to comply may result in injury or death to personnel.
21. Remove winch cable hook (16) from stationary bay lifting eye (17).
22. While assistant maintains tension on winch cable, position WINCH switch (18) to IN.
Release when hook holder (30) is in saddle (31).
TM 9-2320-346-10
0041
0041-13
Back to Top
