TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008
TM-9-2320-346-10

  TM-9-2320-346-10 - Page 409 of 1184

OPERATOR MAINTENANCE
DRIVE VEHICLE IN SLIPPERY CONDITIONS
INITIAL SETUP:
Not Applicable
OPERATE VEHICLE
CAUTION
Do not move traction control switch while vehicle is moving. Damage to
drive line may result.
NOTE
•
The traction control switch has three positions:
.
•
After traction control switch is positioned on, let vehicle creep forward
several feet to allow shift collars to fully engage.
1.
If TRANSFER CASE shift lever (1) is set to LO, 8X8 is automatically engaged and
indicator light (4) will illuminate. Set traction control switch (2) to INTER AXLE. Indicator
light (3) will come on.
TM 9-2320-346-10
0058
0058-1


Back to Top