TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008
TM-9-2320-346-10

  TM-9-2320-346-10 - Page 439 of 1184

OPERATOR MAINTENANCE
OPERATE CLEARANCE LIGHTS
INITIAL SETUP:
Not Applicable
TURN CLEARANCE LIGHTS ON/OFF
CAUTION
Failure to place light switches in the OFF position when vehicle is not in
use may cause battery and/or vehicle damage.
NOTE
•
The master lighting switch is a three-position switch:
.
•
Ensure that the 24V battery disconnect switch is set to ON position
(WP 0079) before operating lights.
•
Clearance lights indicator will illuminate whenever master light switch
is moved out of off position.
1.
Set master lighting switch (1) up one or two clicks; clearance light indicator (2) and
clearance lights (3) will illuminate.
TM 9-2320-346-10
0070
0070-1


Back to Top