TM-9-2320-346-10
TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-346-10 - Page 455 of 1184
OPERATOR MAINTENANCE
OPERATE TURN SIGNALS
INITIAL SETUP:
Not Applicable
SET TURN SIGNAL ON/OFF
NOTE
•
Ensure that the 24V battery disconnect switch is set to ON position
(WP 0079) before operating turn signals.
•
If left turn is desired, complete Step (1). If right turn is desired, skip
to Step (2).
1.
Set turn signal lever (1) down to left turn position. Left turn indicator (2), and driver side
front (3) and rear (4) composite lights will flash (approximately once per second)
simultaneously.
TM 9-2320-346-10
0075
0075-1
Back to Top
