TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 479 of 1184

NOTE

•

If 7 ft. (2.1 m) chain can be disconnected, skip to Step (5).

•

If 7 ft. (2.1 m) chain is too tight to disconnect, continue with Step (3).

•

Removal of limp home setup No. 1 axle is shown. Removal of limp

home setup for No. 2 axle is done in same manner.

3.

Drive flat/shredded tire onto two wheel chocks (3).

3

Figure 8.

4.

Install two wheel chocks (WP 0077) (4) in front of and behind tire across (on same axle)

from tire in which limp home setup is being removed.

4

Figure 9.

5.

Unhook 7 ft. (2.1 m) chain (1) and remove from around frame rail (5) and axle (6).

TM 9-2320-346-10

0082

0082-7