TM-9-2320-346-10
TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-346-10 - Page 554 of 1184
14. Remove pin (6) from clevis (7) and disconnect clevis (7) from tiedown ring (8).
WARNING
•
Always wear protective gloves when handling winch cable. Never let
cable run through hands. Frayed cables can cut severely. Failure to
comply may result in injury or death to personnel.
•
Never operate winch with less than five wraps of cable on winch
drum. Failure to comply may result in injury or death to personnel.
15. Route winch cable (9) around, and over top of winch (10) toward front of vehicle (as
shown).
9
7
10
M977 SHOWN
Figure 8.
16. Set HYD ENABLE switch (2) to on position. MAIN HYD ENABLE indicator (3) will
illuminate.
TM 9-2320-346-10
0089
0089-6
Back to Top
