TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 670 of 1184

4.

Connect two winch pressure lines (3) to male connector (4) and female connector (5)

located on bottom of hook arm assembly.

5.

Turn LHS MODE SELECT switch (6) to AUTO.

CAUTION

•

Do not set HYD ENABLE switch to ON with HIGH IDLE switch on.

Engaging the HYD ENABLE with HIGH IDLE switch on may result in

sudden application of hydraulic pressure to the LHS, resulting in

damage to equipment.

•

HYD ENABLE switch must be positioned OFF before road transport,

or severe equipment damage could result.

6.

Set HYD ENABLE switch (7) to on position. MAIN HYD ENABLE indicator (8) will

illuminate.

7.

Check to see that curb-side and road-side front pin lock assemblies (9) are engaged

onto bay pins (10).