Table 1.
PMCS - BEFORE - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
overloaded and raised
out of transport position.
2.
Move joystick to UNLOAD posi-
tion and raise LHS approximately
1-2 ft. (30-61 cm). LHS ENGAG-
ED indicator will illuminate
(green).
NOTE
LHS NO TRANSIT indicator
will go out when LHS is fully
loaded and in transport posi-
tion.
3.
Move joystick to LOAD position
and lower LHS to transport posi-
tion.
4.
Turn LHS MODE SELECT switch
to Off. LHS ENGAGED indicator
will go out.
5.
Set HYD ENABLE switch to off
position. MAIN HYD ENABLE in-
dicator will go out.
NOTE
Operation of vehicle with mal-
functioning windshield wiper
may violate AR 385-55. (WP
0160)
26
Before
Wind-
shield
Wiper/
1.
Check windshield wiper switch
for proper operation. (WP 0029)
TM 9-2320-346-10
0142
0142-40