TM-9-2320-361-20P
TRUCK, 2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST
OCTOBER 1993
TM-9-2320-361-20P - Page 14 of 1185
TM 9-2320-361-20P
(b) The maintenance code entered in the 4th position tells you whether or not the item is to be
repaired and identifies the lowest maintenance level with the capability to do complete repair (i.e., perform
all authorized repair functions). (NOTE: Some limited repair may be done on the item at a lower level of
maintenance, if authorized by the Maintenance Allocation Chart (MAC) and SMR codes.) This position will
contain one of the following maintenance codes:
Code
O
F
H
L
D
z
B
Application/Explanation
Unit is the lowest level that can do complete repair of the item.
Direct support is the lowest level that can do complete repair of the item.
General support is the lowest level that can do complete repair of the item.
Specialized repair activity (designates the specialized repair activity) is
the lowest level that can do complete repair of the item.
Depot is the lowest level that can do complete repair of the item.
Nonreparable. No repair is authorized.
No repair is authorized. (No parts or special tools are authorized for the
maintenance of a “B” coded item.) However, the item may be reconditioned
by adjusting, lubricating, etc., at the user level.
(3) Recoverability Code.
Recoverability codes are assigned to items to indicate the disposition
action on unserviceable items. The recoverability code is entered in the 5th position of the SMR code as
follows:
Recoverability
CODE
Z
O
F
H
D
L
A
Application/Explanation
Nonreparable item. When unserviceable, condemn and dispose of the item
at the level of maintenance shown in 3rd position of SMR code.
Reparable item. When uneconomically reparable, condemn and dispose of
the item at unit level.
Reparable item. When uneconomically reparable, condemn and dispose of
the item at the direct support level.
Reparable item. When uneconomically reparable, condemn and dispose of
the item at the general support level.
Reparable item. When beyond lower level repair capability, return to
depot. Condemnation and disposal of item not authorized below depot
level.
Reparable item. Condemnation and disposal not authorized below
specialized repair activity (SRA).
Item requires special handling or condemnation procedures because of
specific reasons (e.g., precious metal content, high dollar value, critical
material, or hazardous material). Refer to appropriate manuals/directives
for specific instructions.
c. CAGEC (Column (3)).
The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric
code which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the
item.
d. Part Number (Column (4)).
Indicates the primary number used by the manufacturer (individual,
company, firm, corporation, or Government activity), which controls the design and characteristics of the
item by means of its engineering drawings, specification standards, and inspection requirements to identify
an item or range of items.
NOTE
When you use an NSN to requisition an item, the item you receive
may have a different part number from the part ordered.
3
Back to Top
