TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 1032 of 1176

TM 9-2320-361-24-1

0164 00

0164 00-6

PARKING BRAKESHOE MAINTENANCE (Contd)

ASSEMBLY

NOTE

Perform step 1 only if lubrication fittings were removed.

1.

Install three lubrication fittings (1) into outer brakeshoe (2) and one lubrication fitting (1) and

new pin (7) into inner brakeshoe (6).

2.

Coat pin (5) with light film of GAA grease and install inner brakeshoe (6) on pin (5) with new

clip (8).

3.

Coat pin (3) with light film of GAA grease and install outer brakeshoe (2) on pin (3) with new

clip (11).

4.

Coat cam pin (10) with light film of GAA grease and install cam pin (10) in outer brakeshoe (2)

with new lockwasher (12) and nut (13).

5.

Install two washers (18) and (17) and spring (16) on pins (3) and (5) with two new clips (15).

Position V of spring (16) towards lever (4). Turn cam pin (10) for maximum opening between

brakeshoes (2) and (6).