TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

  TM-9-2320-361-24-1 - Page 401 of 1176

TM 9-2320-361-24-1
0024 00
0024 00-3/4 blank
ENGINE FRONT MOUNT PAD REPLACEMENT (Contd)
FRONT MOUNT PAD INSTALLATION
WARNING
Do not put fingers between frame and engine support. Jack
failure may result in injury to personnel.
1.
Install two lower front pads (24) and upper front pads (25) on front crossmember (6),
2.
Carefully lower engine and radiator (3) guiding two screws (8) through upper and lower front
pads (25) and (24) and front crossmember (6).
3.
Install fuel line (7) on front crossmember (6) with two clamps (5), screws (14), and nuts (4).
4.
Install ground strap (23) on front crossmember (6) with screw (17), washer (18), new
lockwasher (19), and nut (20).
5
Install two washers (15) and new locknuts (16) on screws (8). Tighten locknuts (16) 65–70 lb-ft
(88–95 N
m).
6.
Install two washers (10), springs (11), washers (12), and new locknuts (13) on studs (2). Do not
fully compress springs (11).
7.
Install front bumper (WP 0204 00).
8.
Install brush guard (WP 0203 00).
9.
Lower and secure hood (TM 9-2320-361-10).
10.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
11.
Connect battery ground cable (WP 0126 00).
END OF WORK PACKAGE
~
~
4
7
6
8
9
10
11
12
13
14
15
16
17
18
19
20
23
25
24
2
1
3
22
21
5


Back to Top