TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 441 of 1176

TM 9-2320-361-24-1

0031 00

0031 00-7

ROCKER ARMS AND PUSHRODS MAINTENANCE (Contd)

INSTALLATION

CAUTION

All rocker arm adjusting screws must be backed off flush with

rocker arm body before installation on cylinder head. Failure to

do so may bend pushrods and damage rocker arms.

1.

Position six pushrods (26) in channels (25) through cylinder head (24) and seat in six tappets (23).

2.

Position six rocker arms (27) on pushrods (26) and three supports (22) on cylinder head (24).

3.

Install three supports (22) on cylinder head (24) with six new lockwashers (28) and screws (21).

4.

Tighten six screws (21) 44 lb-ft (60 N

•

m).

5.

Connect battery ground cable (WP 0126 00).

~

23

24

25

26

27

28

22

21